==== Driver configuration for Logitech CollabOS ====

You can monitor and control your connected Logitech CollabOS devices on your network.

Let's start by configuring your device:

  * Check the IP address of your Logitech device (e.g., 192.168.0.1) and verify the connection to the administration console accessible at[[https://192.168.0.1/]]

{{:fr:guide:logitech:pasted:20250324-141238.png?300}}

  * Once you have authenticated, you will see the following screen: Please take note of the IP address used for the management of the equipment. Then go to System > Remote Management > Local Network Access and enter a username and password for the API/WebUI. 

{{:fr:guide:logitech:pasted:20250324-141849.png?600}}

If the Logitech device has been registered on [[https://sync.logitech.com/|Logitech Sync Cloud]], you can enable the local remote management interface via System > Local Network Access: 

{{:fr:guide:logitech:pasted:20250324-142528.png?600}}


Next, let's configure the driver in the Zebrix Control administration interface:

  * **URL** : The URL of the Logitech device, like following pattern https://ip (for example : https://192.168.0.1).
  * **Username** : The account used to log in to the device (default: admin).
  * **Password** : The password used to log in to the device.
  * **Allow self-signed certificate** : Check this box if the device's SSL certificate is self-signed.

Your videoconferencing device is now added as a device in Zebrix Control.

Contact Zebrix support for more information.