==== Driver setup for Netio PDUs ====

You can monitor and control your smart PDUs (Power Distribution Units) connected to your network.


=== Let's start by configuring the Netio PDU ===


To do this, you need to enable the JSON API. In the PDU's administration interface, navigate to M2M API > JSON API.

{{:fr:guide:netio:pasted:20250506-160139.png}}

You will need to define a port, username, and password for the device.


=== Configuring driver in Zebrix Control ===


  * **URL** : The Netio PDU URL (e.g., http://192.168.1.1)
  * **Username** : Username defined in the M2M API > JSON API section.
  * **Password** : Password defined in the M2M API > JSON API section.
  * **Allow untrusted SSL** : Check this box if the PDU is configured to use HTTPS with a self-signed certificate.

Your Netio PDU is now added as equipment in Zebrix Control.