==== Driver configuration for Sharp / NEC screens ====

You can monitor and control your Sharp & NEC screens connected to your network.

The following screen models are supported:
  - NEC MA431, MA491, MA551, M751, M861, M981, P435, P495, and P555
  - Sharp PN-ME432, PN-ME502, PN-ME552, and PN-ME652

Let's start by configuring your screen :

  - Verify the IP address of your Sharp/NEC screen (e.g.: 192.168.0.1): [HOME] Settings / Network / Ethernet / IP address
  - Verify that you are able to connect on screen's administration interface: http://192.168.0.1


Next, let's configure the driver :

  * **IP** : the screen's IP address
  * **Autoriser le SSL non approuvé** : Check this box if the screen is configured to use https with a self-signed certificate

Your screen is now added as a device in Zebrix Control.