==== Configuration of the driver for Sony Bravia displays ====

You can monitor and control your Sony displays connected to your network.

Let's start by configuring your display:

  - Check the IP address of the BRAVIA (e.g., 192.168.0.1): [HOME] Settings / Network / Advanced settings / Network status IP address
  - Enable **Authentication** to use the Pre-Shared Key: [HOME] Settings / Network / Home network setup / IP control Authentication Normal and PreShared Key
  - Set the **PSK**: [HOME] Settings / Network / Home network / setup IP control Pre-Shared Key

Now, let's configure the driver:

  * **URL**: the display's URL, in the format %%http://ip%% (e.g., %%http://10.32.334.134%%).
  * **PSK**: the PSK defined earlier.

Your display is now an equipment in Zebrix Control.

The **MAC Address** field is optional and used for **Wake On LAN** functions. Contact Zebrix support for more information.