==== Driver setup for Yealink RoomConnect MVC XX ====

You can monitor and control your Yealink MVC videoconferencing device, via RoomConnect, connected to your network.

Let's start by configuring your Yealink MVC:

  * On the Yealink MVC panel, go to settings > change account > Log in as administrator
  * Click on the Room Connect application and verify that you have the latest version

{{ :fr:guide:yealink:roomconnect:pasted:20250310-153554.png?600 }}

  * Then, in the main interface of Room Connect, enable Central Control and enter the password that will be used by the driver

{{ :fr:guide:yealink:roomconnect:pasted:20250310-153655.png?800 }}


Next, let's configure the driver in the Zebrix Control administration interface:

  * **URL** : The URL of the Yealink MVC, in the form %%https://ip%% (e.g., %%https://192.168.0.1%%).
  * **Username** : The account used to log in to the device (default: admin).
  * **Password** : The password used to log in to the device. Enter the password you configured when enabling Central Control.
  * **Allow self-signed certificate** : Check this box if the device's SSL certificate is self-signed.

Your videoconferencing device is now added as a device in Zebrix Control.

Contact Zebrix support for more information.