You can monitor and control your connected Logitech CollabOS devices on your network.

Let's start by configuring your device:

• Check the IP address of your Logitech device (e.g., 192.168.0.1) and verify the connection to the administration console accessible athttps://192.168.0.1/

• Once you have authenticated, you will see the following screen: Please take note of the IP address used for the management of the equipment. Then go to System > Remote Management > Local Network Access and enter a username and password for the API/WebUI.

If the Logitech device has been registered on Logitech Sync Cloud, you can enable the local remote management interface via System > Local Network Access:

Next, let's configure the driver in the Zebrix Control administration interface:

• URL : The URL of the Logitech device, like following pattern https://ip (for example : https://192.168.0.1).
• Username : The account used to log in to the device (default: admin).
• Password : The password used to log in to the device.
• Allow self-signed certificate : Check this box if the device's SSL certificate is self-signed.

Your videoconferencing device is now added as a device in Zebrix Control.

Contact Zebrix support for more information.