You can monitor and control your NEC displays (External Control via LAN) connected to your network.

The following display models are supported :

1. NEC Mxx1 Series
2. NEC MExx1 Series

Let's start by configuring your display :

1. Check the IP address of your NEC display (e.g., 192.168.0.1): [HOME] Settings / Network / Ethernet / IP Address
2. Verify that you can connect to the display's administration interface: http://192.168.0.1

Next, let's configure the driver :

• IP : the IP address of the display
• Port : TCP port used by External Control (default is 7142)
• Monitor ID: configured Monitor ID (default is 1)

Your display is now added as a device in Zebrix Control.