Poly Lens
Poly Lens token generation
To generate a token, log on to Poly Lens:
Go to Account > Account Settings :
Go to API Credentials :
Click on Add New.
Select “Just for this account” then click on Next.
Select Admin role the click on Create.
Your Poly Lens token is now generated and you can copy the ClientID and Secret.
External services configuration on Zebrix
Log on to Zebrix Control and go to Configuration > External services.
Click on the Add button 
to configure a new external service.
Enter a name and select the “PolyLens” type.
Copy/paste the required information from Poly Lens and click on Validate.
Your External Service is now configured.
Configuring driver in Zebrix Control
- Device ID : The Device ID is shown on the device PolyLens page.
- External service : The external service we just set on previous step.
Your Poly device is now added as equipment in Zebrix Control.
Port Opening
The probe must be able to establish outbound connections (https, 443) to 'https://api.silica-prod01.io.lens.poly.com/graphql'.