You can monitor and control your Netgear MR42XX switch connected to your network.

Let's start by configuring your switch :

1. Check the IP address of your Netgear switch (for example: 192.168.0.1) and verify the connection to the administration console accessible at https://192.168.0.1/#/login.

1. Once you have authenticated, you will see the following screen: Please note the IP address used for managing the device (highlighted in red on the screen below).

Next, let's configure the driver in the Zebrix Control administration console :

• URL : The URL of the Netgear switch, like the following pattern https://ip:8443 (e.g., https://192.168.0.1:8443). Note that the port used for the Netgear API is 8443.
• Username : The account used to log in to the device (default: admin).
• Password : The password used to log in to the device.
• Allow self-signed certificate : Check this box if the device's SSL certificate is self-signed.

Your switch is now added as a device in Zebrix Control.

Contact Zebrix support for more informations.