Driver setup for Netio PDUs
You can monitor and control your smart PDUs (Power Distribution Units) connected to your network.
Let's start by configuring the Netio PDU
To do this, you need to enable the JSON API. In the PDU's administration interface, navigate to M2M API > JSON API.
You will need to define a port, username, and password for the device.
Configuring driver in Zebrix Control
- URL : The Netio PDU URL (e.g., http://192.168.1.1)
- Username : Username defined in the M2M API > JSON API section.
- Password : Password defined in the M2M API > JSON API section.
- Allow untrusted SSL : Check this box if the PDU is configured to use HTTPS with a self-signed certificate.
Your Netio PDU is now added as equipment in Zebrix Control.