Configuration of the driver for Sony Bravia displays
You can monitor and control your Sony displays connected to your network.
Let's start by configuring your display:
- Check the IP address of the BRAVIA (e.g., 192.168.0.1): [HOME] Settings / Network / Advanced settings / Network status IP address
- Enable Authentication to use the Pre-Shared Key: [HOME] Settings / Network / Home network setup / IP control Authentication Normal and PreShared Key
- Set the PSK: [HOME] Settings / Network / Home network / setup IP control Pre-Shared Key
Now, let's configure the driver:
- URL: the display's URL, in the format http://ip (e.g., http://10.32.334.134).
- PSK: the PSK defined earlier.
Your display is now an equipment in Zebrix Control.
The MAC Address field is optional and used for Wake On LAN functions. Contact Zebrix support for more information.